
mimas Pro user manual v4.1
5
2. Functionalities
mi
mimi
mimas
masmas
mas Pro is a very versatile safety device. In addition to just transmitting an alarm SMS and
position information to predefined receivers the device also supports the following
functions:
Predefined users can query for the current location of mi
mimi
mimas
masmas
mas Pro.
Predefined users can command mi
mimi
mimas
masmas
mas Pro to continuous tracking mode, making the
device send its position in for example 5 minute intervals.
Predefined users can set a geofence (a circular, virtual fence) around a certain coordinate
point. Violating the fence (leaving or arriving the area) causes an alarm.
Taking mi
mimi
mimas
masmas
mas Pro in use is made very simple and fast. The user doesn’t necessarily have to
worry about any special settings. However, if required, the settings that can be changed
are numerous including:
Button sensitivity
Alarm text
Audible / silent alarm
mi
mimi
mimas
masmas
mas Pro can also be set to a power-save mode meaning that the device is asleep most of
the time and wakes up only to send its current location in user-definable intervals.
The user can tailor the mi
mimi
mimas
masmas
mas Pro’s functions as they best suit for his usage.
2.1 Description of alarm sequence
mi
mimi
mimas
masmas
mas Pro sends an alarm message to predefined phone numbers (see 5.1 - Phone
numbers) with the push of a button. If, for some reason, there’s a service break up and the
GSM-network is temporarily down the device attempts to send the alarm until it is
confident that the message has truely been sent.
After sending the alarm message the device makes an alarm call to a predefined number
(alarm call number). If the call is not answered to or if the line is open for less than 10
seconds* the device attempts to call again. mi
mimi
mimas
masmas
mas Pro repeats the call routine 15 times
until it discards the alarm.
The alarm call cannot be hung up from mi
mimi
mimas
masmas
mas Pro but only from the receivers side. The
alarm call is active during alarm only 10 minutes after which the connection is
automatically hung up.
*The 10 second minimum requirement is set to prevent accidental answer - hang-up
sequences (receivers mobile phone is in a pocket, fingering errors etc.).
Comentarios a estos manuales